Create Boot Image
This is a tool for creation, extraction and restoration of boot images which
are necessary for burning a bootable compact disk or creating of an ISO image
of such disk. To perform this operation you need to choose the operation
type, set desired name for the boot image file, choose source device or
disk image file, then press the action button.
The management controls for boot image creation are listed below:
- Create boot image
Save a removable disk into a boot image file on your hard disk.
- Removable drive
- Removable disk drive that contains the disk which needs to get
saved into a boot image file. Use the button Select...
located near by the drive description to select the correct
drive.
- Boot image
- Boot image. Use the button Select... located near by
the image description to select necessary file.
- Write boot image back to removable drive
Write previously saved boot image back to a removable drive.
- Boot image
- Boot image. Use the button Select... located near by
the image description to select necessary file.
- Removable drive
- Removable disk drive that contains the disk on which the
image should be written. Use the button Select...
located near by the drive description to select the correct
drive.
- Extract boot image from disc image
Extract a boot image file from a bootable compact disk image.
- Source disc image
- Source image of the compact disk. Use the button Select...
located near by the image description to select necessary file.
- Boot image
- Boot image. Use the button Select... located near by
the image description to select necessary file.
- Extract boot image from disc
Extract a boot image file from a bootable compact disk.
- Source device
- Compact disk drive that contains the disk which is necessary to
extract a boot image file. Use the button Select... located
near by the device description to select the correct drive.
- Boot image
- Boot image. Use the button Select... located near by
the image description to select necessary file.