Форум обсуждение

Send message

+7-981-8529467 (St.Petersburg),
WhatsUp, Telegram

t.me/os2_guru

Buy eCoSoft
shareware

 
Update

 
Applications

 
Advantages:

 
For developer:

 
(Пайпы программ)

 
Companies:

 
History:

 
(Бонусы)

 
Advice:

 
(Барьеры и решения)

 
Technologies:

 
(Применение в науке, лаборатории, ..)

 
Solutions

 
New eComStation:

 
Future:

 
(Ссылки на другие сайты)

 
(Картинка дня)

 
OS/2 artefacts:

 
Gadgets:

Hardware > Notebooks/barebones ASUS Terminator T3-P5G965 (Core 2 Duo) Homepage: Specification

?>

ASUS Terminator T3-P5G965 (Core 2 Duo)

Mark: Very good

Barebone description:

• CPU: Core 2 Duo
• Motherboard: ASUS P5B-BN/DP (JMicron controller)
• Realtek 8168 - use driver for 8169 from Yanagihara Nobuyuki, change parameters of drivers as described at www.ecomstation.ru/harware.php -> Realtek 8168
• Audio: HDAudio AD198b is partially supported by Uniaud
• Video: Intel GMA X3000 - VESA mode, so added ATI Radeon X300 PCI-express
• USB works fine (5+2)

eComStation installation:

• BIOS: Updated to 0308
• eComStation/Rus 1.2.5. Install it on other PC with SATA then copy system to ASUS T3.
• Setup BIOS Setup: Main -> IDE Configuration -> SATA Configuration -> Compatible
• BIOS Setup: IRQ 3..7 switches to Reserved to prevent conflicts of IRQs
• BIOS Setup: disabled USB Legacy
• Danis506 released in december 2006 (else CD-ROM is not visible)
• ACPI 2.16 installation required 3 days. The Barebone works fine in APIC mode (high IRQs are available). psd=acpi.psd /SMP /CD /NOD /R

Not working components:

• Video: Intel GMA X3000
• firewire
• onboard 6 in 1

Information is sent by: eCo Software -- 2007-01-08 15:11:15

[GoogleAdv]

Comments:

Eugene Gorbunoff 2007-02-07 01:19:58	HDAudio AD1988b
Eugene Gorbunoff 2007-03-29 14:55:01	Addon: * psd=acpi.psd /SMP /APIC /CD /R * Realtek works bad if connected to cheap router * USB works fine if load 1 USBEHCD.SYS, 5 USBUHCD.SYS * Disable USB Legacy in BIOS Setup
Eugene Gorbunoff 2008-03-14 21:10:50	[url]
Eugene Gorbunoff 2009-03-12 18:44:59	ACPI 3.14 1) USB Legacy in BIOS Setup = Off 2) boots ok with any order of drivers: BASEDEV=USBEHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS and BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBEHCD.SYS

Comment this note (add comments, don't expect that other users will reply or join discussions here)
	Your Name: Your E-Mail: CODE: 646735